Protective coatings save you $$$, in damages, and maintenance every year.
Speak to our experts or look through our list of product specs for your needs.
Get in touch.
Looking for flooring, waterproofing, underwater coating or just plain protective coatings for your building or machinery? Speak to our technical consultants for the most suitable application for your needs.
List of Protective Coating TDS
-
SC 12 AC-GARD anti-carbonation coating is single component solvent containing acrylic coating, based on methacrylic resins formulated to give exceptional durability, weather resistance and excellent adhesion to general masonry, especially for protection of concrete structures from the carbonation process. The coating system is designed to coat over reinforced concrete surface to prevent the diffusion of carbon dioxide and water into the concrete matrix that will change the acidity of the concrete environment and result in corrosion of the reinforcing steel bars.
-
SC 35 TOWER FLEXI is a thick-film vinyl top coat made by using plasticized Vinyl Chloride copolymer resin and pigment with good weather resistance. A fast drying, low sheen primer/topcoat giving a tough flexible coating with outstanding adhesion to many difficult areas and it can be applied over galvanised surface in a single coat.
SC 35 TOWER FLEXI top coat with various properties such as weathering resistance, salt water resistance, flexibility, excellent adhesion over wide range of surfaces, firmness, color complementarity, chemical resistance, and quick dryness.
Not suitable for use in areas subject to chemical/solvent attack also not suitable for immersion services.
SC 35 TOWER FLEXI Technical Data Sheet -
SC 60 RDA a rapid drying solvent-based gloss alkyd with good colour retention. It can be used equally well both indoor and outdoor.
Suitable for commercial and light industrial applications for both new build and maintenance projects.
-
SC 560 CF WBE, two pack water dispersed epoxy resin coating system supplied in pre-weighed pack with the added benefit of no odour and solvent free during application and curing.
SC 560 CF WBE can be applied on a wide variety of substrates such as concrete, masonry, etc. It is recommended as a protective and durable coating on floors and walls where both high levels of aesthetics and mild chemical.
-
SC 600 ETC Epoxy Tie Coat is an epoxy-polyamide twopack high solids, high build coating formulated to be used as an intermediate coat between primer and finish, to increase the final thickness of a paint system. Has excellent adhesion, solvents and chemicals resistance, it’s ideal for increasing thickness in paint systems.
SC 600 ETC is used as build coat coating for atmospheric exposure in marine and industrial environments. It forms a hard and tough coating, excellent “undercutting” resistance and has good wetting properties for bonding and can be applied directly to properly prepared steel and concrete substrates.
The product is especially suitable as an intermediate (barrier) coat between zinc rich primers and for optional performance may topcoat with SC 1950 PU aliphatic polyurethane as the final coat. Intermediate and finish coat for steel structures, maintenance operations, protective coating systems and finish coat for epoxy coating systems on concrete surfaces.
-
A two-component, high quality, high solid, solvent borne, based on polyamide cured epoxy resin with high gloss finish. This self-priming coating can be applied directly to the properly prepared concrete and steel surfaces.
-
SC 700 ETL epoxy cured with an amine adduct curing agent. Designed specifically as a highly chemical resistant, non-toxic, tank lining. It is recommended for the protection of steel structures in harsh chemical atmospheres and in aggressive on and off shore environments.
-
SC 890 Novotect is a carbon fibre filled Novolac epoxy coating with excellent chemical resistance to a wide range of chemicals varying from mineral acids to hydrocarbons, caustic solutions and aqueous salts.
A proven versatile system for areas of chemical exposure, offering protection from a broad range of acids and chemicals. A unique carbon fibre additive provides the ultimate in protection. The carbon fibre is designed to form strong impermeable barriers, which further enhance and provides maximum corrosion and chemical resistance.
A pigmented two component, highly chemical resistant performance topcoat designed as a final topcoat. SC 890 Novotect is meant to be a final topcoat and should not be coated with any other topcoat.
-
SC 100/41 PSC is a two-component clear modified silane epoxy coating especially formulated as a surface primer and concrete sealer applications. It has exceptionally low viscosity property that enables it to seep through concrete surface porosity to restrict moisture absorption and significantly increase surface strength. Totally seals the concrete surface with increased hardness and better resistance against moisture penetration and prevents preventing dusting.
-
SC 100 PSC is a two-component clear modified silane epoxy coating especially formulated as a surface primer and concrete sealer applications. It has exceptionally low viscosity property that enables it to seep through concrete surface porosity to restrict moisture absorption and significantly increase surface strength. Totally seals the concrete surface with increased hardness and better resistance against moisture penetration and prevents dusting.
-
SC 100 UWATECT Underwater Coating Technology (SE 100 UWATECH) is a solvent free, two components epoxy system specially designed to be applied in underwater, wet and sweating lines environments. Self-priming on most surfaces and over most generic types of coatings and has the unique ability to be mixed, applied and cured underwater.
-
SC 120 EPS epoxy primer/sealer is a two-component solvent free and low in viscosity. It has been formulated to offer excellent penetration properties and specially developed to bond to both dry and damp surfaces.
-
A two-pack epoxy resin-based damp proofing primer allows for application onto existing damp substrates with high hydrophobicity, flexibility and excellent adhesion. It can be applied to dry or damp surface of concrete floors prior to application of polymer industrial flooring systems.
-
SC 200 SCS WATERPEL is a single pack low viscosity, reactive impregnation for concrete and cementitious substrates based on silane-siloxane solution. The clear sealer is a concrete sealer will penetrate deep into concrete surface and forms a surface tension on the concrete to provide water repellency. This product is a clear coat based on a silane-siloxane and an acrylic resin used for protection of old and new concrete structures. The applied system is a protective layer against corrosion and deterioration caused by water, chlorides, sulphates, carbon dioxide, acid rain and natural weathering.
-
SC 201E THIXO COMPOUND is a two component, solvent free epoxy resin compound made from specially selected epoxy resin-hardener system designed for numerous construction and repair needs. The highly thixotropic material provides good workability on either horizontal or vertical surfaces.
SC 201E THIXO COMPOUND Technical Data Sheet -
A single-component water based anti-corrosive primer/finish, durable and high-performance acrylic coating for use where excellent UV and external weathering properties and chemical resistance are required.
Designed for use as a primer/finish for structural steel, in a wide variety of general industrial environments of light to moderate corrosivity, including on bridges, commercial buildings, infrastructure and manufacturing plants.
-
A two component high solids low viscosity epoxy product with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent rust.
Serves as stand-alone system for steel, concrete, masonry and a variety of chemical environments.
It is also suitable for as floor coating and abrasion resistance for light to moderate heavy traffic conditions
-
A two component high solids low viscosity epoxy product with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent rust.
Serves as stand-alone system for steel, concrete, masonry and a variety of chemical environments.
It is also suitable for as floor coating and abrasion resistance for light to moderate heavy traffic conditions.
-
SC 500 STE is a multi-purpose, surface tolerant anticorrosion, two-part epoxy coating system that applies easily to non-optimal surfaces yet provides excellent chemical and abrasion resistance for usage the standard above-water to provide corrosion protection of metal and concrete structures in processing plants, marine and offshore, petrochemical facilities, sheet piles, underground pipelines, jetty piles, waste water tanks, underground tanks, shipping and other structural steel that requires protection against corrosion in aggressive environment.
Self-priming and suitable for application over most existing coatings and tightly adherent rust. Serves as stand-alone system for a variety of chemical environments and is also designed for various immersion conditions.
-
SC 510 HS MIO two-component polyamide cured epoxy coating. This is a micaceous iron oxide (MIO) pigmented, high solids, high build product.
Designed as a midcoat in systems for new construction and maintenance in atmospheric environments.
SC 510 HS MIO can be applied directly to properly prepared steel surfaces and provide long term protection with just a single coat.
-
SC 1000 AP, a two-pack adhesion promoting primer suitable for a variety substrate, polyamide cured epoxy primer in protective coating systems for steel and nonferrous metals, excellent adhesion to steel, galvanized steel, stainless steel, aluminium, fibreglass, concrete, tiles, plaster board, plastic and timber.
SC 1000 AP adhesion promoting primer which can be overcoated with various finish coats such as polyurethanes, epoxies, acrylics, alkyds and etc.
Long recoating intervals are possible when overcoating with epoxy and polyurethane coatings and other topcoats after extended periods, without the use of a tie coat.
-
SC 1000 ETC Epoxy Tie Coat is an epoxy-polyamide twopack coating formulated to be used as an intermediate coat (Tie-coat) between primer and finish, to increase the final thickness of a paint system. Has excellent adhesion, chemical resistance and stands up to constant immersion, it’s ideal for increasing thickness in paint systems.
SC 1000 ETC adhesion promoting primer/tie-coat which can be overcoated with various finish coats such as polyurethanes, epoxies, acrylics, alkyds and etc.
-
SC 1140 GFE is a versatile and durable coating with excellent use for anti-corrosion as well as potable water lining for tanks & pipes. The solvent free amine cured glass flakes epoxy system is suitable for lining raw water, potable water, filtered water, de-mineralized water, sea water and also a wide range of chemicals. The glass flakes formed layers of impermeable barrier against water and other corrosive chemicals
-
SC 1800 PU Floorcoat is a clear, UV resistant, twocomponents, low viscosity, solvent based acrylic polyurethane.
SC 1800 PU Floorcoat provides a tough scratch resistant, medium to high gloss protective coating for interior and exterior concrete surfaces.
-
SC 1900/41 PU is a solvent based, two-component polyester/aliphatic polyurethane product that provides excellent gloss and UV stable without yellowing, as well as hard wearing, chemical and solvent resistance.
It may be used anywhere a performance urethane is necessary for interior or exterior applications.
Good abrasion resistance for foot traffic and light wheeled traffic and finishes in smooth and non-skid surfaces. Available in clear or pigmented colors with gloss, satin or matt finishes.
It is suitable for use in severe coastal, offshore, or chemical environments where both corrosion protection and aesthetics are very important. Ideal for exposed structural steel, tanks, conveyors, fabricated structural steel, handrails, Industrial plant equipment and machinery (including chemical plants); pipeline, tank exterior and other tough maintenance applications.
Designed for a wide range of floors with various levels of mechanical and chemical exposure.
Recommended as a topcoat as part of the car parks, parking bays, pedestrian walkways, industrial floors, drive ways, ramps and traffic deck systems.
-
SC 1950 PU is a two component chemically curing aliphatic acrylic polyurethane topcoat that provides the ultimate durability that offers excellent gloss, colour retention, flow and levelling with chemical and solvent resistance.
It has an excellent weatherable finish for exterior exposures in industrial and marine environments.
-
This is a two component aliphatic acrylic polyurethane topcoat provides excellent gloss and color retention when used on exterior surfaces exposed to sunlight and rain. SC 2000 ACR PU is a high solids, topcoat system applies easily.
USES SC 2000 ACR PU finish paint is mainly used for medium and high-end industrial anti-corrosion coating, suitable for steel structure, bridge anti-corrosion, concrete protection, building exterior wall, mechanical equipment, engineering facilities, coastal equipment, pipeline anti-corrosion, etc., providing excellent anti-corrosion protection and decoration effect.
-
SC 3000 EM/HD is a 3-component solvent free epoxy resin-based mortar screed for heavy duty floor toppings that offers good mechanical resistance and industrial floors subject to vehicular traffic.
Laid and trowelled into place from 3-12 mm creates seamless floor that provides high compressive and flexural strength. All components are prebatched in the correct mixing ratio.
SC 3000 EM/HD is designed to elevate abrasion and chemical resistance properties for floors by creating a dense protective layer, and also serves applications requiring increased abrasion and impact protection combined with chemical resistance.
Screed applied to compensate for unevenness in the base and it is also recommended as a moisture barrier on concrete slabs that require damp proofing.
-
SC 5005 LT Epoxy Binder is solvent-free, pigmented selflevelling epoxy resin topping for concrete floors.
A two-component solvent-free system based on specially selected modified cycloaliphatic amine epoxy resins and hardeners to produce a smooth topping for concrete that nominally applied to 2mm thick.
Formulated with low viscosity, chemical and an abrasion resistance topcoat for areas with light and high traffic.
It makes industrial floors dust free, seamless, chemicals resistance, good abrasion resistance glossy finishing and these are available is a range of standard colours.
Additional colours can be supplied where order quantities are of suitable volume.
Typical examples include: Warehouses, factories, food preparation areas, clean rooms, automotive assembly, electronics and electrical factories, aircraft hangar, laboratories, hospital, showrooms, refinery, pharmaceutical facilities and other industrial plants sector where chemical resistance are required.
-
SC 6000 A/C a two component, epoxy anti-corrosive primer. It is intended for use over metals that are scuffed, sanded, lightly rusted, and abrasive blasted and previously painted surfaces.
Although this primer is intended for metals, suitable for variety of substrates; galvanised steel, aluminium and concrete surfaces. Long recoating intervals are possible when overcoating with epoxy and polyurethane coatings and other topcoats after extended periods, without the use of a tie coat.
-
SC 6000 ZP a two component, epoxy anti-corrosive primer pigmented with zinc phosphate.
It is intended for use over metals that are scuffed, sanded, lightly rusted, and commercially abrasive blast clean and previously painted surfaces. Although this primer is intended for metals, suitable for variety of substrates; galvanised steel, aluminium and concrete surfaces.
Long recoating intervals are possible when overcoating with epoxy and polyurethane coatings and other topcoats after extended periods, without the use of a tie coat.
-
The scratch coat/sealer coat is the layer to seal/fill the porosity on the surface of the epoxy mortar. It is not intended to be utilized as a surface “coating”. The compound should be spread firmly, forcing the material into deep voids and pinholes. Use the trowel blade to scrape excess material from flat, void-free surfaces. No matter how porous is the mortar, we usually need only 1 scratch coat. It should be spreaded out evenly by steel trowel with the minimum thickness on the surface. Sometimes we can see the silica exposed after the scratch coat and it is acceptable if it is not porous. Actual coverage rate will depend on concrete surface texture and porosity.
-
Syntherm 200 HT is a single component heat resistant finish coating based on modified silicone resins and thermally stable pigments for primed steel structures They are formulated specifically to protect metal surfaces operating to 200°C.
Syntherm 200 HT is recommended for protection of equipment exposed to high temperature like stacks, boiler, heat exchanger, refinery equipment and etc.
To further enhance the corrosion protection properties, an inorganic zinc primer is highly recommended before application of Syntherm 200 HT.